Валюта: Р $

Корзина: пусто

ОБЩАЯ СУММА (с учетом скидки)пусто

Перейти в корзину

ТОM–5 Grinding machine for dressing of the laps and other bodies of revolution

Article: no article
В наличии
0 Р
Количество:
  • Overview
  • ​ MAIN TECHNICAL SPECIFICATIONS
  • CONTENTS OF DELIVERY

Обзор

ТОM5

Grinding machine for dressing of the laps and other bodies of revolution

The machine TOM5 is designed for sharpening laps and other bodies of revolution (drills, cutters, cores, etc.) with any range of angles with their installation in prism-holders.
An abrasive (grinding) stone in the form of a cup is used as a working tool in the machine.

1. Movable table along the X axis

2. Movable table along the Y axis

3. Body

4. Support of the body of revolution

5. Rotary table

6. Electric Rotary body drive

7. Protractor

8. LED lamp

9. Prisms

10. Body of revolution

11. Bubble level

12. Anti-vibration foot

13. Base

14. Control unit

15. Control panel

16. Abrasive stone

17. Protection of the abrasive stone

18. Electric motor housing with abrasive stone

Grinding machine TOM-5 consists of a base (item 13). On the base there is a movable table along the X axis (item 1), a movable table along the Y axis (item 2), a rotary table (item 5) with an electric drive of the body of rotation (item 6), prisms (item 9) and a protractor (item 7). On the body of the prisms there is a support of the body of revolution (item 4) for installing the lap (body of revolution) (item 10). On the base, on the left, there is a table with an electric motor and an abrasive stone (item 5), on the right there is a control unit (item 14) on which the control panel (item 15) is installed. LED backlight lamp with magnification lens (item 8) is installed on the base behind the control unit. Power supplies with control boards are installed inside the machine body (item 3).

The machine is installed on adjustable damping feet (item 12). A level (pos. 11) is set on the base to control the correct installation of the machine. To protect against sparks and abrasives when working with a stone (item 16), a yellow protection is installed on the motor housing (item 17)

On the back of the machine there is a socket for connecting a 220 volt power cable, a switch for backlighting a diode lamp and a 220 volt socket with a protective cover for additional devices.



​ MAIN TECHNICAL SPECIFICATIONS

MAIN TECHNICAL SPECIFICATIONS

• The largest transverse movement (+/- 50mm)
• The largest longitudinal movement (+/- 50mm)
• Angle of rotation of the working carriage 270 °
• Angle measurement range 360 °
• The division of the goniometer is 0.1
• Type of electronic protractor Absolute
• Granularity of abrasive stone (cup) 100 grit
• Supply voltage: ~ 220 V ± 15%
• Power of the electric motor of the main drive 0.2 kW
• Maximum power consumption of the machine 0.3 kW
• The number of revolutions per minute of the electric motor: 0-12000
• The number of revolutions per minute of the drive shaft: 0-2000
• Dimensions (Depth x Width x Height), mm 335x250x300
• Dimensions with lamp (Depth x Width x Height), mm 335x250x450
• Machine weight (net), kg

CONTENTS OF DELIVERY

CONTENTS OF DELIVERY

TOM-5 machine ................................................1 pc.
DL-NG31246 Stone dressing pen holder ................... 1pc.
DL-NG31309 Pen for dressing the abrasive stone ........ 1pc.
DL-NG31196 Pulley for installing the lap 6.8mm .... .... 1pc.
DL-NG31515 Straight caliber 6x60mm ..................... 1pc.
DL-3X220 Power cable 220 volt ............................. 1pc.
The manual......................................................1 pc

Дорогие друзья!

К сожалению, Ваш браузер не поддерживает современные технологии используемые на нашем сайте.

Пожалуйста, обновите браузер, скачав его по ссылкам ниже, или обратитесь к системному администратору, обслуживающему Ваш компьютер.

Internet Explorer

Microsoft

Chrome

Google

Safari

Apple

Opera

Opera Software

Firefox

Mozilla

Вверх