DL-GR7300 Grinding machine.
Grinding machine for the needles of nozzles with speed indicators.
The machine DL-GR7300 is used to sharpen the needles of nozzles and other bodies of rotation.
The machine is controlled by a processor.
The rotation speed of the spindle and the machined body is displayed .
Rotation speed of the spindle and the machined body is adjusted by rotary knobs located on the control panel.
The brightness adjust using the rotary knob located at the top of the control panel.
On the control panel there is a switch for the general power supply of the machine and three power switches for each electric motor of the corresponding drive and the lower illumination.
On the backside of the machine, there is a connector for the power cable 220V, two 220V sockets and a 12V socket for connecting a monitor.
On the front side of the machine housing is a 12 volt connector for connecting the power cable of the motor to drive the bodies of rotation.
The maximum spindle rotation speed is 7300 rpm
The maximum speed of the sharpened body is 1200 rpm
Main motor power supply voltage is 36 V.
Power supply voltage of the electric motor drive - 12 V.
Grinding wheel - fine-grained electrocorundum
Sharpening machine DL-GR7300 can be used with a set of DL-UNI20025 which includes: an electronic industrial microscope, a holder, a backlight and a monitor.