Валюта: Р $

Корзина: пусто

ОБЩАЯ СУММА (с учетом скидки)пусто

Перейти в корзину

DL-GR7500 Grinding machine for the nozzle needles.

Article: no article
В наличии
0 Р
Количество:
  • Overview
  • DL-GR1090 Angle measurement kit of high accuracy
  • DL-UNI20025 (DL-UNI20030) Set with microscope
  • ADDITIONAL EQUIPMENT
  • DL-GR1080 Angle measuring kit

Обзор

GR7500 Grinding machine for the nozzle needles.

The machine DL-GR7500 is used to sharpen the needles of nozzles and other bodies of rotation.

The machine is controlled by a PWM regulators.
Rotation speed of the spindle and the machined body is adjusted by rotary knobs located on the control panel.
The brightness adjust using the rotary knob located at the top of the control panel. On the control panel there is a switch for the general
power supply of the machine and three power switches for each electric motor of the corresponding drive and the lower illumination.
On the backside of the machine, there is a connector for the power cable 220V, two 220V sockets and a 12V socket for connecting a monitor.
On the front side of the machine is a 12 Volt connector for connecting the power cable of the motor to drive the bodies of rotation.

SET OF DELIVERY

  • Grinding machine with grinding wheel 400
  • Drive pulley with an inner diameter of 3 mm
  • Drive pulley with an inner diameter of 4 mm
  • Drive pulley with an inner diameter of 7 mm
  • Grinding wheel repair pen with holder
  • Power supply cable 220 Volt
  • Manual


Technical data 

The maximum spindle rotation speed is 7500 rpm

The maximum speed of the sharpened body is 1000 rpm (*2000)

Main motor power supply voltage is 48 V.

Power supply voltage of the electric motor drive – 12 V.

Grinding wheel – fine-grained electrocorundum

* Special order 

 The grinding machine DL-GR7500 can be used together with  microscope set DL-UNI20025 or set DL-UNI20030
which include : digital microscope, holder, light and monitor. Those sets are NOT included in the set of delivery of the GR7500! 

DL-GR1090 Angle measurement kit of high accuracy

DL-GR1090 Angle measurement kit of high accuracy


Scope of delivery:


1. Digital protractor
2. Bracket for protracktor
3. Shaft NG50205
4. Screw set М4 (2pcs)


Technical details:


1. Measurement range: 0-360 degr.
2. Resolution: 0,005 degr (10 sec)
3. Accuracy : +- 0,2 degr
4. Error : 0,08 degr ( ±30 sec)
5. Working temperature range: 0 ÷ 40°С
6. Battery : 3V CR20032
7. Battery lifetime : 1 year
The two lines simultaneously display the
measurement value in degrees (upper
line) and in seconds (lower line)

DL-NG31263

Caliber to set the angle of 60 degrees (sold separately)

DL-UNI20025 (DL-UNI20030) Set with microscope

DL-UNI20025 Industrial microscope with monitor, elongated stand and backlight

The microscope has a clear image and high resolution


Specifications:
1. Multiplicity of magnification of the microscope: 8x-130x
2. Working distance: 50-200 mm
3. Connecting to the monitor through the ports: HDMI / VGA
4. The size of the microscope (width x length): 40mm x 115mm
Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!

1. Connecting to the monitor through the ports: VGA; HDMI
2. Sensor: Panasonic 1/3 inch 14 MP
3. Image format: jpg, png, tiff
4. Image resolution: 1280x1024 (для HDMI), 1280x1024 (для USB)
5. Video format: MP4
6. Video resolution: 720pHD/1280x1024
7. Frame frequency: 60FPS
8. White balance: Auto
9. Light: Auto
10.Menu language: english
11.Magnification: 8-100X 
12.Focus regul:objective
13.Working distance: 55 mm-130 mm
14.Field of vision: 2,4 mm-32 mm
15.Connection of the lens with electronic unit> threaded  F25 
16.Power supply: 5V, 2А
17.Size of electronic unit: 70х50х50 mm
18.Objective size: 115 mm (L) * 40 mm (dia)
19.Electronic unit weight: 210 g
20.Objective weight: 208 g

Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!

DL-UNI20030  Industrial microscope with monitor, elongated stand and backlight


Specifications:
1. Sensor: Panasonic 1/3 inch 14 MP
2. Image format: jpg, png, tiff
3. Image resolution: 4320*3240(for HDMI), 1080*1920(for USB)
4. Video format: MP4
5. Video resolution USB:1920*1080
6. Frame per second: 60FPS
7. White balance: Auto
8. Light:Аuto
9. Menu language:english
10.Magnification: 8-100X 
11.Focus regul:objective
12.Working distance: 55 mm-130 mm
13.Field of vision: 2,4 mm-32 mm
14.Connection of the lens with electronic unit> threaded F25
15.Power supply: 5V, 2А
16.Size of electronic unit: 70х50х50 mm
17.Objective size: 115 mm (L) * 40 mm (dia)
18.Electronic unit weight: 210 g
19.Objective weight: 208 g
20.Connectors: USB / HDMI

Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!

ADDITIONAL EQUIPMENT

DL-UNI20200 Grinding wheel grid 400


DL-UNI20201 Grinding wheel grid 200


DL-UNI20202 Grinding wheel grid 100

DL-UNI20203 Grinding wheel conical grid 320

DL-UNI20204 Grinding wheel conical grid 230

DL-GR1050 Grinding wheel holder

DL-GR1060 Shaft for balancing grinding wheel


DL-GR1070 Balancing delice
ATTENTION! GR7300 grinding machine set of delivery  does not include balancing device, holder and shaft!

DL-GR1080 Angle measuring kit

DL-GR1080 Angle measuring kit

Set of delivery:
1. Angle measurer
2. Bracket
3. Shaft NG31249
4. Screw set М4 (3pcs)

Technical data:


    1. Measurement range: 0-360 degrees
    2. Resolution: 0,05 degrees
    3. Accuracy : +- 0,2 degrees
    4. Error : 0,05 degrees
    5. Battery : 3V CR20032
    6. Battery life: 1 year

Дорогие друзья!

К сожалению, Ваш браузер не поддерживает современные технологии используемые на нашем сайте.

Пожалуйста, обновите браузер, скачав его по ссылкам ниже, или обратитесь к системному администратору, обслуживающему Ваш компьютер.

Internet Explorer

Microsoft

Chrome

Google

Safari

Apple

Opera

Opera Software

Firefox

Mozilla

Вверх