DL-GR7400. Grinding machine for the needles of nozzles
The DL-GR7400 machine is used for grinding needles of nozzles and other bodies of rotation.
The machine is controlled by PWM controllers.
The control of the speed of rotation of the spindle and the processed body is regulated by means of rotary knobs located on the control panel.
Rotation speed (revolutions) is displayed as a percentage.
Adjusting the brightness of the lower illumination of the processed body of rotation is performed using the rotary knob located in the upper part of the control panel.
The control panel has a general power switch for the machine and three power switches for each electric motor of the corresponding drive and a backlight.
On the rear side of the machine body there is a connector for supplying a 220-volt power cable, two 220-volt sockets and a 12-volt connector for connecting a monitor.
On the front side of the machine body there is a 12 volt connector for connecting the electric motor power cable to drive rotation bodies.
The grinding machine DL-GR7400 can be used in conjunction with the kits: DL-UNI20025, DL-UNI20026, DL-UNI20027, DL-UNI20030.
which includes: electronic industrial microscope, tripod holder, top illumination and monitor. This kit is not included in the scope of supply and is available by separate order.
DL-GR7300
Sharpening machine for dressing needles of atomizers with rotation speed indicators
The DL-GR7300 machine is used for sharpening needles of atomizers and other bodies of rotation.
The machine is controlled by PWM controllers.
The control of the speed of rotation of the spindle and the processed body is regulated by means of rotary knobs located on the control panel.
Adjusting the brightness of the lower illumination of the processed body of rotation is performed using the rotary knob located in the upper part of the control panel.
The control panel has a general power switch for the machine and three power switches on
each electric motor of the corresponding drive and lower lighting bulbs.
On the rear side of the machine body there is a connector for supplying a 220-volt power cable, two 220-volt sockets and a 12-volt connector for connecting a monitor.
On the front side of the machine body there is a 12 volt connector for connecting the electric motor power cable to drive rotation bodies.
The grinding machine DL-GR7300 can be used in conjunction with the kits: DL-UNI20025, DL-UNI20026, DL-UNI20027, DL-UNI20030.
which includes: electronic industrial microscope, tripod holder, top illumination and monitor. This kit is not included in the scope of supply and is available by separate order.
Auxiliary equipment necessary for convenient work with the machine
Collet cartridge holder (collet) for the valve of BOSCH piezo injectors, runout 1-5; 6-10; 11-15 microns. To restore geometry by grinding. Suitable for BOSCH piezo injectors series 0445115
Collet cartridge holder (collet) for the valve of BOSCH piezo injectors, runout 1-5; 6-10; 11-15 microns. To restore geometry by grinding. Suitable for BOSCH piezo injectors series 0445115
