Common-Rail

DL-CRN50299KIT

Kit for measuring the valve stroke (AH) of CRIN 2 / CRIN 3 injectors with detachable and non-demountable armature

Price: on request
DL-CRN50299KIT. Kit for measuring the valve stroke (AH) of CRIN 2 / CRIN 3 injectors with detachable and non-demountable armature

Kit for measuring the valve stroke (AH) of CRIN 2 / CRIN 3 injectors with detachable and non-demountable armature, as well as for measuring excess stroke using an adapter.

Brief description of measurements:

Reset the readings of the mesuring indicator
Calibrate of measuring indicator
Join Dimension Constituents
Take measurements, repeat 3 times

The “Instruction steps” tab describes the sequence of measurements. Full instructions are included with the kit.

To measure and subsequently repair injectors, you will need a set of original washers, which is purchased separately by the client. By selecting the washer or grinding it, the required stroke is achieved. Work on grinding and adjustment is convenient to carry out on a surface grinder GM-08 with a lower movable work table.

Digital indicator  DL-KIP012 (pos. 11) – 1 pc.
Adapter housing DL-CR31555 (pos. 9) – 1 pc
Adapter nut DL-CR31527 (pos. 9) – 1 pc
Measuring probe CRN30708 (pos. 1) – 1 pc.
Fixing sleeve  DL-CR31556 (pos. 9) – 1 pc
L-shaped hex wrench 2.5 for fixing the measuring head (pos.12) – 1 pc.
L-shaped hex wrench 1.5 for fixing the sleeve (pos.12) – 1 pc

Attention! Positions are specified according to kit DL-CRN50091. Other indicator measuring heads of higher quality and more expensive can also be used. measuring indicator has the same measuring range ( 0-25.4 mm and resolution 0.001 mm). As an example DL-KIP021, DL-KIP026, DL-KIP031.

All of them are available upon request.